Palen Performer Custom Carved Archtop Guitar #60 w set Humbucker w Cedar Creek case

Product Description

This is a rare opportunity to own a Palen Archtop – 6 String Archtop. Highly flamed maple, and also what appears to be flamed spuce is just an amazing amount of silking in the spruce making it looked highly flamed also. Playability and tone is absolutely amazing. In great shape with a few small lacquer cracks.  This is one of the earlier models, serial number 60 made in 2006 . (george Benson owns #10, and Rodney Jones, Paul Brown, Jc Stiles and many other famous musicians play Palen Performer)s.Teh Performer has a slightly thicker top to resist feedback and a magnificent full acoutic tone.   Nelson Palen has built 100 archtop and has had to quit building because of health reasons. You can read an article on our website of this builder. His archtops are amazing!

PALEN ARCHTOPS are among the finest archtop guitars ever built. The Palen Archtop is an “X” braced traditional instrument, descendent from the D’Aquisto school of instruments- very light and acoustic. It features a hand carved and graduated top and back, slightly thicker than many typical archtop guitars, with a very resonant and acoustic tone.

In most cases the back and sides are of bigleaf maple. Woods used are always the best available with great resonance and flame. Tops are either Sitka spruce or Englemann spruce, hand carved and tap tuned. Necks are five piece and constructed from matching maple with laminated ebony between the 3 pieces of maple. The front of the Headstock is covered with ebony and features an inlaid “P”. You may also select your choice of wood for the front of the headstock. The back or the headstocks are multi-laminated with an array or gorgeous exotic woods, which ad great strength and beauty.

Scale length is 25 inches, nut width is 1.80″ and 2.15″ at the twelfth fret for this Palen Neck depth at the 3rd fret is 0.821, and the 12th fret  and 0.91″ at the 9th fret.   This Palens has an ebony fretboard, with inlays. The  body depth is 3″ at the rims, and comes standard with a Hand wound Kent Armstrong Routed in PAF O Humbucker.  Hardware is the best available quality of your choice, and tailpiece, pickguard, bridge and fingerboard are ebony.  A single Venetian cutaway and a routed set Hand wound Kent Armstrong pickup.

“After purchasing Palen #59 and bringing it home, some wonderful things started to happen. My wife tells me that I sound better than ever. The vocalists that I backup aren’t so happy because they tell me that the Palen sounds so smooth, that their singing pales in comparison to the tone of the Palen. Frank L Michigan”

Specifications

About Palen

Nelson Palen started building his acoustic archtop Palen Guitar in November, 1998 and finished it the last week in June, 1999. He read the book and viewed the 6-hour video by Bob Benedetto, who has been building guitars and violins for 30 years and is considered the premier archtop builder in the country. The Palen archtop is unique in that the soundboard and back are carved from wood approx. 1″ thick to a domed shape similar to that found on a violin.

Before Nelson made Palen archtops, he had been making decorative wooden bowls as shown here for approx. 12 years. His woodworking skills and attention to detail began here and from his ancestry. His dad, Benedict Palen, has been doing woodwork since the 1930’s starting out with a pedal-powered lathe. His dad’s enterprise, Artistic Woodcrafts started with a Shopsmith and then homebuilt a heavy-duty lathe capable of swinging up to 32″ diameter blanks.. The blanks for the bowls are made up of segmented rings stacked and glued. Various wood species, domestic and foreign are used. Examples are walnut, white gum, padauk, wenge, mahogany etc. Nelson Palen added a CNC desktop mill in 1998 that can be mounted on the lathe for engraving. The spindle is slowly rotated by computer command with approx. 1000:1 reduction. The basic turning operation is done with conventional hand tools.

Product Enquiry